HOW TO
SYD FIXES: 4 Ways to Fix a Flat Tire on Tubeless
In 2020 I suffered a major injury that kept me…
Rate this story:
0 votes so far

In 2020 I suffered a major injury that kept me off the bike for the entire year. That, plus covid-19, made for some pretty rough times. One of the ways I coped was by learning how to wrench on my own bike. Previously, I could barely fix a flat tire, but I had a good teacher (my husband, Macky) and working on bikes became a way to stay sane while expanding my skillset, even if I wasn’t riding. My bike maintenance lessons were pretty hilarious, and I found myself making a lot of dumb mistakes—errors that you don’t usually see in pro bike maintenance tutorials on YouTube. We decided to publish these lessons online to create a space for pressure-free, beginner-friendly bike maintenance tutorials. Thus, our channel SYD FIXES BIKES was born. I’ll be sharing some of my tutorials here on the PEARL iZUMi blog. So if you’re new to riding or just starting to do your own bike maintenance, you’re in the right place!

In this episode, I go over several different ways to fix a flat when you’re out on the trail (or road!).

The most important part of fixing a flat is knowing and having what you need! If you aren’t prepared, it doesn’t matter how good you are at troubleshooting tire issues. I run tubeless tires and here’s what I carry with me on different types of rides to make sure I don’t get stuck in a bad situation:

Short Rides (when I know I’m close to home/civilization)

•Tubeless Plugs

•CO2 Cartridge + Inflator Head

Longer Rides

•Tubeless Plugs (such as Dynaplugs, “Side of Bacon,” DARTs, etc.)

•2 X CO2 Cartridges + Inflator Head

•Tube

•Tire Lever

Backcountry / Remote Rides

•All of the above plus,

•Handpump

•Patch Kit

First off, it’s worth mentioning that the best way to avoid flats is to run tubeless tires. A tubeless setup allows you to run lower pressures (ideal for trail riding), while avoiding the dreaded “snake bite” pinch flat. Also, thanks to tire plugs, it’s way easier to fix a flat tire while running tubeless. If you’re struggling to set up your bike tubeless, check out this video, or head to your local bike shop. If you aren’t running tubeless, you’ll need to skip to Step 3 of this post (putting in a tube).

STEP 1: Let the sealant do the work!

While this may not always solve the problem, it’s always a good first step. As soon as you hear the distinctive hissing noise of a puncture, your first line of defense should be to find the hole and rotate the wheel so that the puncture spot is down. This will allow the sealant in the tire to pool there and hopefully seal the hole. Give it a few minutes and if it seals, congrats, it’s your lucky day! Use your CO2 to add more air if needed, and carry on. Assuming it’s not your lucky day, keep reading.

The first step when trying to fix a flat on tubeless is to let the sealant do the work.
Letting the sealant do the work..

STEP 2: Plug that tire!

Tire plugs are the best thing to happen to mountain biking in the past ten years. Seriously, they are amazing. There are quite a few different varieties, but they all work more or less the same: find the hole and use the plug inserter to jam the plug into the puncture. Then use your CO2 to air your tire back up. Last, place the plugged area at the bottom so the sealant can pool and seal any gaps between and around the plug. Voila! Off you go!

If the sealant won't seal the puncture, try a tire plug.
Plugging the tire with a “bacon strip”

Sounds easy right? It is, but it does require a certain amount of finesse which is why we recommend practicing on an old tire in the safety of your garage. It’s important to get the plug deep enough into the hole, which might require more force than you were expecting, so it’s good to get used to this when you aren’t alone in the middle of nowhere and starting to panic! Also, there are several different varieties of CO2 inflator heads—some work by twisting backwards, some by pushing a button—so it’s important to get used to how yours works. (Just ask me about the time my CO2 blew up in my face and all the air went out before I could even get it onto the valve).

Side of bacon plugging a puncture on tubeless tires.
PRO TIP: If you have a pocket knife, trim the end of the plug so it’s as short as possible. If you don’t have a knife, at least fold it down, otherwise it may catch and pull out when braking!

STEP 3: So you have to put in a tube…

Sometimes the puncture is just too big or (ahem, hypothetically) you put the plug in improperly and it falls out ten feet later and you can’t find it to try again (purely hypothetical, this definitely didn’t happen the first time I tried to plug a tire in a race…). The reality is that sometimes you just have to put in a tube while out on the trail and, welp, that sucks, but it doesn’t have to be the end of your ride.

First, remove your wheel. I find the easiest way to do this is to put my bike upside down, but you can also look for a branch to hook your seat on. If possible, get far enough off the trail so you don’t cause a roadblock for oncoming riders! Next, remove your tire. Hopefully you brought your tire lever. If not, making sure you push the bead of the tire into the center on both sides, as this will help you get the tire off. Now is also a good time to check your tire for thorns, bits of glass, etc., that could have caused the flat. Otherwise you will just immediately flat your new tube!

Remove your valve stem and inflate the tube slightly so that it holds its shape (this will help you avoid pinching it when you put your tire back on), then insert the tube. Put the tire back on (carefully!) and air it up with your CO2 (or your handpump if you already used your precious cartridge in an unsuccessful attempt to plug the tire).

Sometimes, you just have to put in a tube.
Putting in a partially inflated tube.

STEP 4: Boot it.

Sometimes you will rip a hole so big in your tire (usually, the dreaded sidewall slice) that if you just put a tube in it will bulge out the side, leaving it exposed and easily puncturable. So if you have a puncture bigger than about a quarter inch, putting in a boot is a good idea. While you can buy a special made boot, it’s not necessary. Did you bring a bar or a pack of chews? Great, you get to have a snack, and then you have the perfect boot. Do you have a dollar bill in your wallet? Perfect, cheaper than getting an Uber home. Simply, press the wrapper or dollar bill against the sliced part of the tire while you insert your tube. Then air it up and the “boot” will protect your tube and prevent it from bulging out of the hole.

If the puncture is really gnarly you'll need to boot the tire to protect the tube from flatting.
A boot was DEFINITELY necessary in this case.

While I’d never wish a flat on anybody, they’re bound to happen from time to time. I hope these tips come in handy the next time you’re faced with tire troubles and stay tuned for the next installment of SYD FIXES!

Rate this story:
0 votes so far

5 thoughts on “SYD FIXES: 4 Ways to Fix a Flat Tire on Tubeless

  1. Hey guys….that was great! I have a new favorite Mechanic!!! Her name is Syd Schultz! When ever Syd may “tire” of Repair Videos….she certainly has a career in Stand Up!! I chuckled quite hard at Syd’s comedy….”wheres my head”. In fact I’m not sure I have ever been so entertained by a repair video before. who in the hell is her side kick that keeps butting in her commentary? ….Ok Macky did add helpful comments!

    This makes want my Be More Awesome Jersey more than ever now…!!!

    I can’t wait to watch more “Syd Vids”. You sure have a winner there Macky! Most chicks don’t even want to get their hands dirty….Not Syd…she’s a real trouper!

  2. Syd mentions the “mule system”, the plugger that magnetically attaches to the bar w/ magnetic CO2 holder. My google-fu is coming up empty. Can you direct me to that?

  3. Great video and I thank you!

    Question: where can I purchase the “Mule Patch Tire Kit” which mounts to the bars and top tube.

Leave a Reply

Your email address will not be published.

Syd talking about basic repairs for your bikes
SYD FIXES: Basic Bike Maintenance for Before & After Rides In 2020 I suffered a major injury that kept me…
Syd & Macky // 02.2021
Read more
Racing for Adventure and Experience in Chile A year ago, after close to five years of racing…
Syd & Macky // 06.2019
Read more
Lessons Learned from Racing a 7-Day Mountain Bike Race as a Couple In July, my husband Macky and I lined up at…
Syd & Macky // 11.2019
Read more
What’s In Your Bike Bag? As a seasoned cycling guide and professional racer, I’ve found…
Dillon Caldwell // 05.2021
Read more